ANSOL T3DのRev395がリリースされました。
弊社ダウンロードサイトにはWindows版、Linux版がアップロードされています。
リリースノート（T3D Rev395）
2026/04/29
==========
Revision : 395
Session File Version : 2.5700|0.1360
Transmission3D SDF Version : 0.1360
Build Date : 2026/04/23
Source Revision : 10601
Release Notes:
This is primarily a bug fix release, in order to
address issue (1) below, created by the previous
release (Rev 393). This issue could potentially
crash existing models. If your models do not encounter
this problem, you can skip this release.
The dependencies installer T3DDependencies is unchanged.
1) Bug Fix: A memory allocation bug was introduced in Release 393
(Src Rev 10371, Oct 23 2025), in the PENTA element. This bug was
trying to allocate memory for an array that had already
been allocated. This bug would cause calyx to crash during
the analysis stage.
2) Added to the bevel pinion model, a COMPOUND clearance pin
connection option. This will allow to model multiple
clearance-pin connections for imported carriers
with bevel pinions. Without this new option, the cross-pin
can connect to the carrier only at a single 'hole'
location.
3) Added a new inspection file format option "GDE_XML". Added
GUI options to support the new file format.
4) Added a checkbox in the iSys TOOTH/Utilities menu
to load tooth dimensions from a GDE_XML file.
5) Added new script Scripts/SunModfnMap.cmd, which creates
a data file which can be used to create a Surface
pot of total surface modification vs Roll and FaceWidth,
for a Sun gear.
6) Added new script Scripts/postsplinecontactresults.txt to
extract contact result data for a detailed spline (Conformal
Sun-Ring) contact pair.
7) Relaxed the 45 Degree max limit on the CupAngle in a tapered
roller bearing. Now we allow it to go all the way to
90 Degrees.
8) Curvic couplings: The WholeDepth and ChamferDepth should be
measured perpendicular to the EndAngle,not along the length
of the flank.
9) In the Curvic Coupling CUTTER menu, the POINTWIDTH parameter
is not used. So it has been removed.
10) Enabled a new MKL based eigen solver for dynamic analysis.
For Static and Quasi-static analysis, we continue to use the
old eigenvalue solver, which is slower, but significantly
more precise.
11)The Curvic Coupling calculation of the location of the
thickness measurement point (rthick,zthick) has been
corrected so that it works correctly, even when the Pitch
cone is very close to the Face cone.
12)Fixed the Curvic coupling mesh generator so that it works
for all combinations of CONCAVE/CONVAX and signs of the
HorizontalSetting.
13)Fixed the problem where sometimes Rotor races would not
assemble together correctly if a Sun, Ring or similar
race coincided simultaneously with more than one mutually
non-contiguous rotor races.
14)Bug fix: vGlass would crash when the attribute of the
contact pattern was changed.
15)Fixed typos in the help messages for MAGLOGMOD and
LEFFLOGMOD for the various bearing types.
16)Fixed bug in iSys where incorrect value was being set
for FourPointBallBearing ContactAngle1 when bearing was
displayed. This bug only affected the 3D display in iSys.
The model generated for analysis was correct.
17)In iSys, the NAME of a pinion bearing was not being
shown on the Model Tree. This is now corrected.
18) Bug Fix: The straight bevel mesh generator crashed
on Linux when built using the clang based compiler suite.
