\u524d\u56de\u306eRev320\u304b\u3089\u672a\u3060\u3072\u3068\u6708\u7a0b\u3067\u3059\u304c\u3001\u4ee5\u4e0b\u306e\u5185\u5bb9\u304c\u4fee\u6b63\u3055\u308c\u305fRev322\u304c\u30ea\u30ea\u30fc\u30b9\u3055\u308c\u307e\u3057\u305f\u3002
Rev322\u306f\u5f0a\u793e\u30b5\u30a4\u30c8\u304b\u3089\u30c0\u30a6\u30f3\u30ed\u30fc\u30c9\u3067\u304d\u307e\u3059\u3002
\u672c\u65e5\u304b\u3089\u30c7\u30a3\u30ec\u30af\u30c8\u30ea\u69cb\u6210\u3092\u5c11\u3057\u5909\u66f4\u3057\u3066\u3044\u307e\u3059\u3002<\/p>
install\/\u30d7\u30ed\u30b0\u30e9\u30e0\u540d\/\u30a4\u30f3\u30b9\u30c8\u30fc\u30e9\uff06\u30e6\u30fc\u30b6\u30de\u30cb\u30e5\u30a2\u30eb\u7b49 \u4ee5\u4e0b\u30ea\u30ea\u30fc\u30b9\u30ce\u30fc\u30c8\u3067\u3059\u3002<\/p> Rev 322 – 2017-05-18 16:18:14 -0400 (Thu, 18 May 2017) 10)When creating a report file from iSys, it did not create 11)Added flank TWIST modification for involute gears<\/p> 12)Added new ADD_BASE_SHAFT button in Guide, in the HYPOID|COMMON menu 13)Added USE_SPRD_BLD_THICKNESS checkbox in the COMMON menu 14)Added a coefficient of friction to customized menu for 15)Added a PARALLELIZE_SEARCH checkbox in the SETUP menu. It is 16)Bug Fix: Models with both roller bearing and a shaft segment with non-zero 17)Bug fix: On Linux, the memory footprint reported did \u524d\u56de\u306eRev320\u304b\u3089\u672a\u3060\u3072\u3068\u6708\u7a0b\u3067\u3059\u304c\u3001\u4ee5\u4e0b\u306e\u5185\u5bb9\u304c\u4fee\u6b63\u3055\u308c\u305fRev322\u304c\u30ea\u30ea\u30fc\u30b9\u3055\u308c\u307e\u3057\u305f\u3002Rev322\u306f\u5f0a\u793e\u30b5\u30a4\u30c8\u304b\u3089\u30c0\u30a6\u30f3\u30ed\u30fc\u30c9\u3067\u304d\u307e\u3059\u3002\u672c\u65e5\u304b\u3089\u30c7\u30a3\u30ec\u30af\u30c8\u30ea\u69cb\u6210\u3092\u5c11\u3057\u5909\u66f4\u3057\u3066\u3044\u307e\u3059\u3002install\/\u30d7\u30ed\u30b0\u30e9\u30e0 […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[8],"tags":[],"_links":{"self":[{"href":"https:\/\/www.advancae.com\/blog1\/wp-json\/wp\/v2\/posts\/4503"}],"collection":[{"href":"https:\/\/www.advancae.com\/blog1\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.advancae.com\/blog1\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.advancae.com\/blog1\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.advancae.com\/blog1\/wp-json\/wp\/v2\/comments?post=4503"}],"version-history":[{"count":1,"href":"https:\/\/www.advancae.com\/blog1\/wp-json\/wp\/v2\/posts\/4503\/revisions"}],"predecessor-version":[{"id":4504,"href":"https:\/\/www.advancae.com\/blog1\/wp-json\/wp\/v2\/posts\/4503\/revisions\/4504"}],"wp:attachment":[{"href":"https:\/\/www.advancae.com\/blog1\/wp-json\/wp\/v2\/media?parent=4503"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.advancae.com\/blog1\/wp-json\/wp\/v2\/categories?post=4503"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.advancae.com\/blog1\/wp-json\/wp\/v2\/tags?post=4503"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/strong>\u30fbTransmission3D \u306e\u30c7\u30a3\u30ec\u30af\u30c8\u30ea\u540d\u306f\u3001TM3D \u306b\u306a\u308a\u307e\u3057\u305f\u3002
\u30fb\u304b\u306a\u308a\u53e4\u3044\u30a4\u30f3\u30b9\u30c8\u30fc\u30eb\u30d5\u30a1\u30a4\u30eb\u306f\u524a\u9664\u3057\u307e\u3057\u305f\u3002<\/p>
==========
1)Added option to allow user defined reference frames for bearings.
\u00a0 Previously, the user could only specify the Z axis of the bearing,
\u00a0 and the X and Y axes were automatically calculated. Now the user
\u00a0 can use the SPECIFY_X_AXIS checkbox to also specify the X axis
\u00a0 orientation. The Y axis is therefore also determined.
2)Added a small reference frame in the top right corner of the 3D
\u00a0 windows in iSys to indicate the orientation of the reference frame.
\u00a0 The X, Y, Z axes are identified by the their color.
3)Added buttons LOAD_SB_SUMMARY, LOAD_IB_SUMMARY and LOAD_OB_SUMMARY in the
\u00a0 HYPOID|SUMMARYFILE menu, to read the Gleason text summary. If the .spa file
\u00a0 is not available, but the machine summary is available, then
\u00a0 this button can be used to load the machine settings and cutter
\u00a0 geometry. The LOAD_SB_SUMMARY loads both sides. The other two
\u00a0 buttons will load only a single side.
4)Added torque harmonics feature. If the rotor is of TYPE+OUTPUT,
\u00a0 then a ENABLE_TORQUEHARMONICS checbox is visible. Turning
\u00a0 on this option will allow you to superimpose NTORQUEHARMICS
\u00a0 harmonics. Each harmonic in the ROTOR|HARMONIC menu is specified
\u00a0 by an AMLPITUDE, ORDER and PHASE. AMPLITUDE is the zero to peak
\u00a0 variation. ORDER specified the harmonic’s frequency as an
\u00a0 order (multiple) of the rotor’s rotation frequency. A PHASE
\u00a0 of zero will create maximum torque at T=0.
5)Added a way to have higher resolution at specific
\u00a0 teeth for conformal sun-ring contact. This will be
\u00a0 useful in modeling splines. Use the ENABLE_MULTIPLE_CONTACT_GRID
\u00a0 checkbox in the PAIRS menu to access this feature.
6)Added a way to have higher resolution at a specific bearing roller.
\u00a0 Use the ENABLE_MULTIPLE_CONTACT_GRID checkbox in the
\u00a0 bearing’s CONTACT_GRID menu to access this feature
7)Peak memory is now reported in MB instead of GB.
8)Increased number of load sensors, number of FE Probes and
\u00a0 number of surface gages to 400
9)Added option to parallelize geometric search.<\/p>
\u00a0 the file correctly if the path name has a space in it<\/p>
\u00a0\u00a0 of face-milled and Face-hobbed gears and pinions, to crteate a
\u00a0\u00a0 shaft that correctly interfaces with a hypoid.<\/p>
\u00a0\u00a0 for face-milled pinion and gear. When this option is checked,
\u00a0\u00a0 the machine settings for both sides must be the same, otherwise
\u00a0\u00a0 and error message will be emitted. If the machine settings are
\u00a0\u00a0 the same for both sides, then it will assume that both sides of
\u00a0\u00a0 the tooth slot are cut simultaneously, so it does not need to
\u00a0\u00a0 ask the user for the tooth thickness.<\/p>
\u00a0\u00a0 the SHAFT-SHAFT contact PAIR in iSys. Previously it was only visible
\u00a0\u00a0 in the native menu and in Guide.<\/p>
\u00a0\u00a0 turned OFF by default. Turning it ON enables an experimental
\u00a0\u00a0 feature, which parallelizes the geometric search part of the
\u00a0\u00a0 analysis. It is not 100% stable, so it is only meant for
\u00a0\u00a0 experimentation.<\/p>
\u00a0\u00a0 rigid constraint failed to load in calyx.<\/p>
\u00a0\u00a0 not include virtual memory.
\u3000\u6ce8\uff09\u4eee\u60f3\u30e1\u30e2\u30ea\u30b5\u30a4\u30ba\u3092\u542b\u3093\u3060\u5168\u30e1\u30e2\u30ea\u30b5\u30a4\u30ba\u304c\u8868\u793a\u3055\u308c\u306a\u3044\u73fe\u8c61\u304c\u3001Linux\u7248\u3067\u306f
\u3000\u3000\u3000\u4fee\u6b63\u3055\u308c\u307e\u3057\u305f\u3002Windows\u7248\u306f\u3001\u5b9f\u30e1\u30e2\u30ea\u30b5\u30a4\u30ba\u8868\u793a\u306e\u307e\u307e\u3067\u3059\u3002
18)Bug fix: When using adaptive grid sizing, calyx could crash if the
\u00a0\u00a0 STARTANAL command is used without a preceding GENERATE command.
19)Bug Fix: Changes in Rev 318 triggered generate error when
\u00a0\u00a0 RING-PINION pair is defined in the CARRIER menu.
20)Bug Fix: Fixed a problem with geometric search for a hypoid gear pair.<\/p>","protected":false},"excerpt":{"rendered":"